DOCUMENT:Q109083  04-JAN-1994  [W_NT]
TITLE   :Using Colorado SCSI PowerTapes under Windows NT
PRODUCT :Windows NT
PROD/VER:3.10
OPER/SYS:WINDOWS
KEYWORDS:

--------------------------------------------------------------------------
The information in this article applies to:

 - Microsoft Windows NT operating system version 3.1
 - Microsoft Windows NT Advanced Server version 3.1
--------------------------------------------------------------------------

The Colorado SCSI PowerTapes are not directly supported in Windows NT and
they are not on the Hardware Compatibility List (HCL). However, the
Colorado SCSI PowerTapes can be configured to work under Windows NT. The
actual hardware is manufactured by Colorado Memory Systems and the firmware
for the tape drives are made by Tandberg, which is on the HCL.

The following list describes the Colorado PowerTape models and it’s
compatible Tandberg Tape Drive Model:

   PowerTape 2 GB Model PT25 - Tangberg TDC 4100
   PowerTape 4 GB Model PT50 - Tandberg TDC 4200

Steps to Install the PowerTape under Windows NT
-----------------------------------------------

1. Select the Windows NT Setup Icon from the Main Group and start the setup
   program.

2. Select Options from the Menu.

3. Choose ADD/Remove Tape Devices.

4. From the Tape Device Setup dialog box choose the Add button.

5. From the Select Tape Devices Dialog Option Box, select the devices drop
   down box arrow.

6. Then Select the Tandberg 3669, 3829, 4120, 4220 driver.

7. Now select the Install Button and follow the instructions.

For technical support or additional information, contact Colorado Memory
Systems at (303) 635-1501 or use their BBS at (303) 635-6650.

The Colorado SCSI PowerTapes are manufactured by Colorado Memory Systems, a
vendor independent of Microsoft; we make no warranty, implied or otherwise,
regarding this product's performance or reliability.

Additional reference words: 3.10
KBCategory:
KBSubCategory: hrdwr


=============================================================================

THE INFORMATION PROVIDED IN THE MICROSOFT KNOWLEDGE BASE IS
PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND.  MICROSOFT DISCLAIMS
ALL WARRANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES
OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.  IN NO
EVENT SHALL MICROSOFT CORPORATION OR ITS SUPPLIERS BE LIABLE FOR
ANY DAMAGES WHATSOEVER INCLUDING DIRECT, INDIRECT, INCIDENTAL,
CONSEQUENTIAL, LOSS OF BUSINESS PROFITS OR SPECIAL DAMAGES, EVEN IF
MICROSOFT CORPORATION OR ITS SUPPLIERS HAVE BEEN ADVISED OF THE
POSSIBILITY OF SUCH DAMAGES.  SOME STATES DO NOT ALLOW THE EXCLUSION
OR LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES
SO THE FOREGOING LIMITATION MAY NOT APPLY.

Copyright Microsoft Corporation 1994.